Lift check valve installation

Lift check valve installation method

The lift check valve slides along the vertical centerline of the valve body. The lift check valve can only be installed on the horizontal pipe. On the high pressure small diameter check valve, the valve ball can be used. The shape of the lift check valve is the same as that of the shut-off valve (common to the shut-off valve), so its fluid resistance coefficient is large. The structure is similar to the shut-off valve, and the valve body and disc are the same as the shut-off valve. The upper part of the valve flap and the lower part of the valve cover are machined with a guide sleeve, and the valve guide can be easily lifted and lowered in the valve guide guide. When the medium is downstream, the valve flap is opened by the medium thrust. When the medium stops flowing, the valve flap is self-retained. The drooping falls on the valve seat to prevent the medium from flowing back. The direction of the inlet and outlet passages of the straight-type lift check valve is perpendicular to the direction of the valve seat passage; the vertical lift check valve has the same direction of the medium inlet and outlet passages as the valve seat passage, and its flow resistance is smaller than that of the straight-through type.



Leave your messages:

Send Inquiry Now
Send Inquiry Now